• Double-Pillar P6 Outdoor Fixed Installation LED display
  • Double-Pillar P6 Outdoor Fixed Installation LED display
  • Double-Pillar P6 Outdoor Fixed Installation LED display
  • Double-Pillar P6 Outdoor Fixed Installation LED display
  • Double-Pillar P6 Outdoor Fixed Installation LED display
  • Double-Pillar P6 Outdoor Fixed Installation LED display

Double-Pillar P6 Outdoor Fixed Installation LED display

  • original region :JYLED LED DISPLAY
  •   LED type: SMD3535

      Pixel configuration: 1R, 1G, 1B

      Wave length(nm): R: 622.5-625,G: 522.5-525,B: 465-467.5

      Pixel Pitch(mm): 6

      Module size(mm): 192(L) * 192(H) * 25(D)

      Module resolution (pixels): 32(L) * 32(H)

      Module quantity in a cabinet: 4(L) * 4(H)

      Cabinet size(mm): 768(L)* 768(H)* 160(D)

      Cabinet resolution(pixels): 128(L)* 128(H)

      Cabinet material: Steel

      Weight (kg/cabinet): ≈45

      Packing Way: Three cabinets packed into one

      Packing box material: Wooden case

      Packing box size (mm: ) 1070 * 870 * 600

      5.LED Display Electricity parameter

      Density(real): (pixels/m2) 27777

      White balance brightness(cd/m2): ≥6500

      Color temperature(K): 5000-9300

      Brightness adjusted: 100 grades by software, or by Auto-optic induced.

      Viewing angle: Horizontal 110°;Vertical 50°

      Best viewing distance(m) : 6~200

      Communication distance(m: ) Internet Wire:100, Multimode Fiber Cable:500

      Driving mode: Constant current, 1/4 duty

      Gray grades: 16384 levels for each color

      Display color: 4,398,046,511,104

      Refresh frequency (Hz): ≥2400

      Frame frequency (Hz): ≥60

      Picture display method: Dot to dot display synchronized with CRT

      Signal interface: DVI

      Input signal : Video: PAL/NTSC optioned. VGA, S-video, DVD,TV

      Display format: 800 * 600,1024 * 768, 1280 * 1024

      Software: Support windows series system

      Protection grade: IP65(front); IP54(rear)

      Working temperature(oC): -20~+60

      Humidity(RH): 10%~90%

      Stored temperature (oC) : -30~+70

      Screen lifetime(hours): ≥100,000

      Out of controlled pixels: ≤1/10,000 (Out of controlled pixels means the pixels of which the brightness and the wave length are both >10% depart to the normal one)

      Whole display flatness: Less than 1mm Juncture

      Maintenance way : Back-maintained, modules displaced

      Switching power supply: 110V/60HZ,220V/50HZ (single phase)

      Power consumption (w/m2 ): Max 800, Average: ≈250

 

 

Comparison of the effect of double-pillar P6 full-color LED display P6 outdoor LED display features: 1. Using high-quality LED light-emitting tube, high height, low light decay, large horizontal and vertical viewing angles. 2. The ink color
contact now
  • product description

Comparison of the effect of double-pillar P6 full-color LED display P6 outdoor LED display features:
double-pillar P6 full-color LED display

1. Using high-quality LED light-emitting tube, high height, low light decay, large horizontal and vertical viewing angles.

2. The ink color is leveled*, the contrast is very high, the display color is uniform, and the picture is clear.

3. The surface of the cabinet is treated with the anti-corrosion technology of the shipbuilding industry to effectively ensure the service life of the display screen.

4. The wiring inside the box and the terminal of the cable are directly fixed on the terminal block, and the screen body has stable and safe performance during long-term work.

5. The cabinet + bracket structure can be used, the whole screen splicing has a high flatness, and the magnetic column adsorption method is adopted at the same time.

Display installation instructions and precautions

1) Steps to install the display box

*Step: Open the upper cover of the outer packaging of the box, remove the pearl cotton, and move out of the box.

The second step is to disassemble the anti-static tape and check the appearance of the cabinet for damage.

The third step is to open the back cover of the box and check whether all the screws, cables, and power cords are loose or fall off.

2) Precautions during installation

a. When moving the box, please handle with care, and put a protective layer (paper or carpet) on the ground to prevent

Bumps, scratches, drops, etc.

b. When installing the box body, it is not allowed to knock the box body with iron hammers or other iron objects, or kick the box body with feet.

Way of construction.

Detection of the power supply system of the display screen (distribution cabinet, switching power supply in the cabinet)

A. Check whether the live wire L, the neutral wire N, and the ground wire FG are short-circuited.

B. Check whether the neutral wire N and the ground wire FG are short-circuited, and the resistance value should be ∞.

C. Check whether the receiving board +5V power supply and GND (30~50Ω) are short-circuited with the ground wire FG, live wire L, and neutral wire N. The resistance value should be ∞.

D. Check whether the receiving board GND and ground wire FG, live wire L, and neutral wire N are short-circuited. The resistance value should be ∞.

E. Check whether the output +5V and GND of each power supply are short-circuited, and the resistance should be 30-50Ω.

Pay attention to the problem of display installation.

1) After the display screen is installed, take measures to prevent lightning strikes on the screen body. The main power distribution input terminal is connected to a lightning arrester.

2) Live work on the display screen is strictly prohibited (especially 220V input and output ports).

3) The sending system does not support hot plugging, so you must unplug the power cord before plugging in the wires between various devices.

4) During the hoisting process of the display box, it must be firmly fixed before hoisting. At the same time, it prevents the box from colliding during the hoisting process and causing damage to the display product.

5) During the installation process, workers must take safety measures (wear safety helmets, safety belts and other protective products).

6) When disassembling the control system board and other equipment, pay attention to anti-static (with anti-static gloves) 4. The wiring inside the box and the terminal of the cable are directly fixed on the terminal block, and the performance of the screen is stable and safe during long-term work. .

Related Product
  • Indoor P6 Led Folding screen Indoor P6 Led Folding screen

    Product model: P6 indoor full-color LED display LED electronic display Dimensions: 19296㎜ Practical range: Indoor P6 full-color

  • How about P1.9 P2.6 P2.9 P3.91 How about P1.9 P2.6 P2.9 P3.91

    The inner and outer arcs 15,0,-15 multi-level adjustable. The cabinets are seamlessly spliced without bright lines or separate hi

  • P5 LED display price quotation P5 LED display price quotation

    P5 LED display price quotation material specifications and technical parameters P5 LED display, price P5 display quotation Produc

  • How much is the P5 LED display How much is the P5 LED display

    How much is the P5 LED display price per square meter? JYLED reminds you that the price of the P5 display is not fixed, because t

  • What are the costs of P4 led fu What are the costs of P4 led fu

    The main cost components of P4 led full-color display: 1. Screen body cost: P4 led full-color display screen which chooses differ

  • What types of LED display model What types of LED display model

    What types of display models are there? According to the use environment, led display screens can be divided into outdoor and ind

  • What should be paid attention t What should be paid attention t

    At present, with the continuous increase of Chinas LED display development industry, large-scale LED displays are gradually incre

  • What kind of hardware does the What kind of hardware does the

    P4 full-color LED display is one of the very common types of LED display in daily life. Many people want to know what hardware th

 

Get In Touch For More Information

JYLED Led Display Whatsapp Contact Number