i5A-F Dual-mode Card

May 18,2021| LED Receiver

i5A-F Dual-mode Card

i5A-F Dual-mode Card

Overview

i5A-F is a dual-mode card which makes both synchronous and asynchronous system available and the two modes can be seamlessly switched.

i5A-F helps to greatly improve the display effect, higher refresh rate, color input, it helps to realize more dedicate image and more stable screen.

                                              i5A-F Dual-mode Card

Features

        i5A-F is a dual-mode card which makes both synchronous and asynchronous system available and the two modes can be seamlessly switched.

        i5A-F helps to greatly improve the display effect, higher refresh rate, color input, it helps to realize more dedicate image and more stable screen.

        Support brightness and chromaticity calibration

        Support normal chip, PWM, lighting chip

        Support any scan mode from static to 1/32 scan

        Support various freeform display, spherical display, diamond display, creative display, etc.

        Support signal output for 16 groups of RGBR’ and 20 groups of RGB, 32 groups as extended

        Wide working voltage range with DC3.3 - 6V

        Compatible with S series Sender, Z series Sender, C series Sender, gigabit NIC, etc.

 Specifications

Control system parameters

Sending   device

Gigabit NIC, S series Sender, Z series   Sender, C series Sender, etc.

Control   area of every  card

Full-color: 256*256 Pixels, for special applications the column can be   extended to 1024 pixels.

Cascade   control area of the largest regional

65536*65536 pixels

Cascade   card number

65536 PCS

Network   port exchange

support

Synchronization

Nanosecond   synchronization between the card and the card

Display Quality

Refresh   rate for conventional chip

Static:   64*64, up to 16000Hz

1/8 scan: 128*128, up to 10000Hz

Serial frequency

0.2MHz-41.7MHz

Gradation

65536

Minimum unit of OE values

8ns, 8ns multiples steps

Gray scale compensation

Each level grayscale separate compensation

Display module compatibility

Chip   supports

Support   conventional chips, PWM chips, lighting chips and other mainstream chips.

PWM   chip supports

Support   hundreds of different specifications of the PWM chip, such as MBI5042   (requires a separate program)

Scan   mode

Two   scanning methods to support refresh rate multiplier

Scan   type

Support   static sweep to 1/32 scan

module   specifications Support

Support   4096 pixels within any row, any column

The   direction of the cable

Support   route from left to right, from right to left, from top to bottom, from bottom   to top.

Data   Sets

16 RGB data sets

Data folded

Support to   the fold, reverse fold, with the already discounted, such as refresh rate   significantly improved.

Data   exchange

16 sets of   data any exchange

Module   snapshot

Support   any pumping point

Data serial transmission

RGB,   R8G8B8, R16G16B16, etc. in the form of serial

Data   Expansion

Support   the D signal as a clock extension, the total amount of data can be extended   to 32.

Compatible device and interface type

Communication   distance

UTP cable≤140M

CAT6 cable≤170M

OPTIC FIBER transmission distance unrestricted

Compatible   with transmission equipment

Gigabit switch, fiber transceiver, optical switches.

power   interface

Wire   terminal

HUB   Interface Type

All   types

Physical parameters

Size

143* 93mm

Input   voltage

DC 3.3V-6V  

Rated   current

0.6A

Rated   power

3W

Storage   and transport temperature

-50 to 125

Operating   Temperature

-25 to 75

Body static resistance

2KV

Weight

100g

Cabinet level overall monitoring (in conjunction   with monitoring module)

Monitoring   functions

Temperature, humidity,   smoke, etc.

Intelligent   emergency treatment

In exceptional cases ,monitoring module can automatically trigger relay switch to turn off the power or   alarm

LCD   display

support

Monitoring function (in conjunction with multi-function   card)

Monitoring   functions

Temperature, humidity,   smoke, relay switch

Remote   control

Support for relay   switch to turn on/off the power supply of equipment remotely

pixels level calibration

Brightness calibration

Support

Chromaticity calibration

Support

Other features

Onboard memory

2G

Double   backup

Support

Shaped   screen

Any offset   of the 16sets of data, drawn at random points, the performance of data   exchange control profiled screen.

Hardware

i5A-F Dual-mode Card

1、Interface function

S/N

Name

Function

Remarks

1

Power 1

Connect DC5V power supply for the receiver card

Only one   is used

2

Power 2

Connect DC5V power supply for the receiver card

3

Indicate lamp

Indicate power and signal transmission status

red for   power,

green for   signal

4

Network port A

RJ45For   transmitting data signals

The dual   network ports can achieve import/export at random, which can be identified in   an intelligent way by the system.

5

Network port B

RJ45For   transmitting data signals

6

LCD interface

Connect to the LCD display


7

Dual 50P pins

Connected to all display HUB boards


8

Test button

The attached test procedures can achieve four kinds of   monochrome display (red, green, blue and white), as well as horizontal,   vertical and other display scan modes.


9

External interfaces

For Indicate lamp and test button


2Indicator Light functions

Red: ON for power available

Green: ON/OFF quick flash (about 5-10 times/seconds) indicates that the data signal transmission is normal.

3Definitions of 50P pins

1)     16 RGBR' mode

i5A-F Dual-mode Card

2)     20 RGB mode(Extended mode1)

i5A-F Dual-mode Card

3)     20 RGB mode(Extended mode2)

i5A-F Dual-mode Card

4、External interface definition

i5A-F Dual-mode Card



5Figure for receiving card size and hole position

i5A-F Dual-mode Card



  Article KeyWords:i5A-F Dual-mode Card

 

Get In Touch For More Information

JYLED Led Display Whatsapp Contact Number