i5A Receiving Card

May 18,2021| LED Receiver

i5A Receiving Card

i5A Receiving Card

Overview

i5A adopts a new generation of image processing core, which greatly improves the display effect. Support higher level of color input and gray level output, which creates more delicate images; Great improvement has been done onto low gray scale aspect, which enhances its display effect; higher refresh rate and more stable display images are supported based on high-quality display effect.

i5A Receiving Card

In addition to inherit all the advantages and features 5A had, i5A adopts a new generation of system architecture, and possesses more intelligent function and more stable system. i5A receiving card supports a range of more intelligent and high-end functions like program arbitrary switching, external connect to LCD display module, etc., which lead LED control system to a brand new level.

Features

         More perfect display effect by adopting new processing core.

         High refresh rate, high gray scale and high brightness with conventional chips.

         Perfect performance under lower grayscale status.

         Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.

         Support the effective display at first grayscale value.

         Support 14 bits high-precision point-by-point calibration in the brightness and the chromaticity.

         Support conventional chips, PWM chips and lighting chips, etc.

         Support any scan mode from static to 1/32 scan.

         Support any pumping point and data arbitrary offset and realize various freeform display, spherical display, diamond display, creative display, etc.

         Support signal output for 16 groups of RGBR’ and 20 groups of RGB, 32 groups as extended.

         Large load capacity.

         Wide working voltage range with DC 3.3 -6V.

         Support dual receiving card backup, loop backup, and dual-machine backup, etc.

        Compatible with C series Sender, Z series Sender, S series Sender, etc.

 

Specifications

Control   system parameters

Sending device

C Series Sender, Z Series Sender, S Series Sender, etc.

Control   area of every  card

Full-color:   256*256 Pixels, for special applications the column can be extended to 1024   pixels

Cascade   control area of the largest regional

65536*65536 pixels

Cascade card number

65536 PCS

Network port exchange

Support arbitrary   use

Synchronization

Nanosecond   synchronization between the card and the card

Display   Quality

Refresh   rate for conventional chip

Static: 64*64, up to 16000Hz

1/8 scan:   128*128, up to 10000Hz

Serial frequency

0.2MHz-41.7MHz

Gray   Level

Maximum 65536 levels

Minimum unit of OE values

8ns, 8ns multiples steps

Gray scale compensation

Each level grayscale compensate   separately

Display   module compatibility

Chip supports

Support conventional chips, PWM chips, lighting chips and other   mainstream chips.

PWM chip supports

Support hundreds of different specifications of the PWM chip, such as   MBI, MY, SUM, etc.

Scan mode

Conventional mode and high refresh rate mode to support refresh rate   multiplied

Scan type

Support static sweep to 1/32 scan

Module   specifications support

Support 4096 pixels within any row, any column

The   direction of the cable

Support route from left to right, from right to left, from top to   bottom, from bottom to top

Data groups

16 RGBR’ data groups,20 RGB data groups

Data folded

Support 2 split, 4 split in the same direction and 2 split in the   opposite direction, which refresh rate significantly improved

Data exchange

16 groups of data for any exchange

Module snapshot

Support any pumping point

Data serial transmission

RGB, R8G8B8, R16G16B16, etc. in the form of serial

Data expansion

Support the D signal as a clock extension, the total amount of data can   be extended to 32

Compatible   device and interface type

Communication   distance

UTP   cable≤140M

CAT6   cable≤170M

Optic fiber: Single Mode Fiber Transceiver≤20KM  

Multi-Mode Fiber Transceiver ≤550M (Use RP Repeater to extend unlimited)  

Compatible   with transmission equipment

Gigabit switch, fiber   transceiver, optical switches

DC power   interface

Wire   terminal

HUB interface   type

All   types

Physical   parameters

Size

143* 93mm

Input voltage

DC 3.3V-6V

Rated   current

0.6A

Rated   power

3W

Storage   and transport temperature

-50℃ to 125℃

Operating   temperature

-25 to 75

Body   static resistance

2KV

Weight

100g

External   interface

LCD   display

support

Monitoring   function (in conjunction with multi-function card)

Monitoring   functions

Temperature,   humidity, smoke, relay switch

Remote   control

Support for relay switch to turn on/off   the power supply of equipment remotely

Pixel level calibration

Brightness calibration

Support

Chromaticity calibration

Support

Other   features

Hot   backup

Support loop backup and dual   machine backup, seamless switch

Shaped   screen

Any offset of the 16sets of   data, drawn at random points, the performance of data exchange control   profiled screen.

Hardware

i5A Receiving Card

1. Interface

S/N

Name

Function

Remarks

1

Power 1

Connect DC 3.3~6V power supply for the receiving card

Only one is used

2

Power 2

Connect DC 3.3~6V power supply for the receiving card

3

Indicator light

Indicate power and signal transmission status

red for power,

green for signal

4

Network port A

RJ45, For transmitting data   signals

The dual network ports can   achieve import/export at random, which can be identified in an intelligent   way by the system.

5

Network port B

RJ45, For transmitting data signals

6

LCD interface

Connect to the LCD display

7

Dual 50P pins

Connected to all display HUB boards

8

Test button

The attached test procedures can achieve four kinds of monochrome   display (red, green, blue and white), as well as horizontal, vertical and   other display scan modes.

9

External interfaces

For Indicator light and test button

2. Indicator Light functions

Red: ON for power available

Green: ON/OFF quick flash (about 5-10 times/seconds) indicates that the data signal transmission is normal.

3. Definitions of 50P pins

1)16 RGBR' mode

i5A Receiving Card

2)20 RGB mode(Extended mode1)

i5A Receiving Card

3)20 RGB mode(Extended mode2)

i5A Receiving Card

4. External interface definition

i5A Receiving Card

5. Figure for receiving card size and hole position

i5A Receiving Card


  Article KeyWords:i5A Receiving Card

 

Get In Touch For More Information

JYLED Led Display Whatsapp Contact Number