P5.2 Outdoor rental LED screen

What are the advantages of JYLED P5.2 outdoor rental LED display?

The second-generation anti-collision disk technology is adopted to effectively prevent the lights from falling;

Using silent power supply, no noise, low power consumption

Selected high-contrast mask with good display effect;

Each lamp is carefully selected and each parameter is carefully adjusted to ensure safe and stable operation of the entire screen;

The module can be easily installed and disassembled before and after, and the maintenance is more convenient

A total of four handles are configured on the upper and lower sides, and the screen body can be removed, installed, and transported more quickly. Pre-maintenance technology, hard-wired settings, and more stable signal transmission;

The module and the cabinet are double fixed by a strong magnetic core magnetic sheet and screws;

Pre-maintenance process, hard-wired settings

What types of P5.2 LED display screens are there?

At present, the application range of P5.2 LED display is relatively broad, so it can be produced in various types according to different use environments. Common ones are P5.2 outdoor rental LED display, P5.2 floor tile screen, and P5.2 transparent LED display, etc.

What are the advantages of P5.2 LED display is worth paying attention to?

★Outdoor P5.2 LED display has small display spacing and closer viewing distance; high-quality surface mount lamps with national star gold wires and copper brackets are used, horizontal and vertical viewing angles are more than 130°, uniform light mixing, high color matching, and good consistency , The display screen is clearer and more real, which fully meets the needs of outdoor display;

★The brand-new mask design of the P5.2 LED display makes the light emitted by the LED almost zero reflection, ensuring the display effect of the screen;

★The bottom shell of P5.2 outdoor LED display adopts the reinforced rib design of quasi-building engineering mechanics, which enhances the load-bearing stretch capacity of the product and improves the overall flatness of the product; the densely calculated stripe design of the mask greatly reduces the problem of environmental light reflection The interference caused by the light emission of the lamp ensures that the contrast of the product is optimal under various ambient light, so that the ink color of the whole screen is darker, the contrast is better, and the color of the image is restored more realistically.

★The cabinet design of the P5.2 outdoor full-color display unit module adopts high-temperature spraying technology, which greatly improves the anti-rust function;

★Outdoor P5 full-color display high-performance "ground effect" solution circuit board layout design, can effectively control the voltage peak overshoot, maximize the life of the lamp, chip and other components; use conventional universal power supply, signal The interface mode is not affected by any geographical, environmental, control system and other factors, and can easily carry out the backup, connection and installation operations of various types of display screens.

★The flatness of the installation surface of the outdoor P5.2 outdoor full-color display module should be controlled within plus or minus 0.2mm, and the flatness of the whole screen is good;

★The P5 outdoor display circuit board adopts wave soldering process and has a green oil oxygen barrier layer to prevent moisture and oxidation of the circuit and improve the service life;

★The front of the outdoor P5 full-color display uses a dedicated thermally conductive potting silica gel, and the back is sprayed with three anti-paint protection, and double waterproof protection, which makes the product more weather-resistant and faster heat dissipation; unique drainage hole design, reducing steel structure Defects cause the module to enter the water and cause the module to be damaged, which improves the self-protection ability of the module and further guarantees the service life of the display screen.

★Compared with outdoor in-line full-color products, outdoor surface mount products are lighter and lighter, bringing convenience to assembly, transportation and later maintenance, saving time and effort.

★P5.2 outdoor LED display has a three-in-one design structure, and the three chips are very close. They mix light in the same bracket, instead of three discrete oval LEDs, so the red, green, and blue light mixing effect It is better than the straight-inserted elliptical LED screen, especially suitable for close viewing.

★ Due to the three-in-one design structure of the P5.2 outdoor full-color display, the full-color SMD size is small, so the light-emitting area is small, and the black area is large, which improves the contrast of the LED display.