Jul 20,2021| LED Knowledge
P2 full-color LED display should also be properly maintained when it is used indoors. In particular, some requirements should be paid attention to during use. While fully understanding the use of this type of display, attention should also be paid to maintenance measures. So, what detailed requirements should be paid attention to when using P2 full-color LED display? Let's get to know it together!
1. Humidity control: The large screen of full-color display
containing humidity will cause corrosion of full-color display components when
powered on, which will cause permanent damage; therefore, the humidity of the
environment where the large-screen LED display is used must be maintained. Do
not let anything with moisture properties enter your large full-color LED
display screen.
2. Active protection: try to avoid possible
problems, take proactive protection, try to keep the items that may cause damage
to the full-color display screen away from the screen; and when cleaning the
screen, you should wipe it as gently as possible to prevent the damage. The
possibility is minimized.
3. Keep the power supply stable: keep the power supply stable, and do grounding protection to avoid lightning
strikes. Do not use it under harsh natural conditions, especially strong
lightning weather.
4. It is strictly forbidden to enter the screen
body such as water, iron powder and other easily conductive metal
objects. The large screen of the LED display should be placed in a
low-dust environment as much as possible. Large dust will affect the display
effect, and too much dust will cause damage to the circuit. If water enters due
to various reasons, please cut off the power immediately and contact the
maintenance personnel until the display panel in the screen is dry before
use.
5. Control the screen current: Do not stay in full
white, full red, full green, full blue and other full bright screens for a long
time during playback, so as to avoid excessive current, excessive heating of the
power cord, damage to the LED light, and affect the LED display Service
life.
6. Control the use time: It is recommended that the
large LED display screen has a daily rest time of more than 2 hours. In the
rainy season, the LED screen large screen should be used at least once a week.
Generally, the screen should be turned on at least once a month and lighted for
more than 2 hours.
After understanding the above content, customers can pay more attention to these aspects when using it, which can greatly improve the use value of the P2 full-color LED display.