How to modify the text on the led display？

The Shenzhen JYLED manufacturer has received feedback from many foreign customers, saying that after the product was bought back, it was troublesome not knowing how to modify the text in it. do not worry! Next, let's talk about the common method of changing the word of LED display. After reading it, it becomes easier to change the word by yourself.

Three methods can help you modify the text content of the led display.

LED display screen change method one: change the character through the mobile phone (or remote control)

This way is the easiest way, we can edit the short message to send and change the ad subtitles.

LED display screen change method two: change the character through the u disk

Use the software that comes with the led display screen to make it on the computer, and then download one of the software to the USB flash drive, and save the setting parameters and content to the USB flash drive. When changing the program, copy the content directly with the USB flash drive to get it. Just replace it on the led display.

LED display screen change method three: change the character through the serial line

This method is slightly more complicated. First connect the led display and the computer, and then create or open a file. Open the display control software and set the screen parameters. This requires a password (most of the control card passwords are 168 or 888).

There are mainly two settings. The first one is time. There are multiple formats for time. After selection, it will appear in the upper left corner by default; it can be opened and adjusted. The second is the content, select subtitles, you can accurately edit the words you want, just click send.

How to change the word on the LED display, usually there are three ways: serial port, U disk, mobile phone (or remote control), according to the corresponding operation mode, you can operate on how to change the word on the led display.

When we change the characters through the USB flash drive, notice that there is a column in the software menu, click USB to download, select the school, and save the setting parameters and content to the USB flash drive.