Mobile / WhatsApp:+86-13553831871 [email protected]
May 10,2021| LED Knowledge
Does the P8 outdoor LED display need to be cleaned frequently? The answer is of course yes, and it needs to be cleaned before and after installation, which is a very important link.
After the P8 outdoor LED display operates for a certain period of time, there will be dust and other debris that affects the display. Regular cleaning and maintenance of the display can prevent the LED display from being unclear, mosaic, and color cast during the playback process. And so on, can also extend its service life and improve the quality of use. So what are the precautions during the cleaning process? The following editor will introduce you one by one.
1. Cleaning of semi-finished LED module: When the LED module is only semi-finished without a kit, it needs to be cleaned with special washing water. Dip the LED module with some washing water and then scrub it with a brush. Accelerate the dissolution of rosin and the shedding of flux, and remove dust and impurities. This step of cleaning is done by the manufacturer.
2. Cleaning of P8 outdoor LED display after installation: After the installation of the LED display for a period of time, dust and impurities will accumulate. In order not to affect the display effect of the display, it is necessary to use clean water or clean water with detergent such as detergent Clean the surface of the LED display.
Note that you can only clean the surface of the outdoor LED display, and you must be very careful when cleaning. Do not get the cleaning water on the back of the LED module. This step of cleaning can be done by the manufacturer during after-sales maintenance, or it can be done by the customer.
Give your LED display a "shower", although it is a very easy and simple thing, but it is of great help to the maintenance and stable improvement of the display effect of the LED display.