Mobile / WhatsApp:+86-13553831871 firstname.lastname@example.org
May 10,2021| LED Knowledge
We all know that the outdoor P8 LED full-color display not only has the advantage of high refresh rate, but also has many advantages such as good stability, low power consumption, wide radiation range, and high protection level. It mainly allows users to see more information dissemination outdoors. For this information dissemination tool, LED electronic display is the most suitable product. Common p8 outdoor LED screens include not only advertising screens, text screens, graphic screens, as well as special-shaped screens and creative screens, etc. Because of them, we can better make our city shine.
Many users do not know how to build a P8 outdoor LED display. If the outdoor display is blown by bad weather, it must be the product quality problem of the LED display manufacturer. This is not the case. Stability is also inseparable from our construction. How to correctly install the P8 outdoor full-color LED advertising display has become a matter of special concern for customers, especially for the technical construction personnel of LED manufacturers, how to understand the construction of outdoor screens and the maintenance of advertising screens to better achieve Cooperation between the two parties. So how to install the P8 outdoor full-color LED advertising display correctly? Take a look at the following points.
1. Installation site survey
The installation site visit is the first step to install the P8 outdoor LED display. If anyone does not look at the environment and tells you that it must be fine, then congratulations, you have been cheated. Before we install the P8 outdoor full-color LED advertising display, we will make a series of inspections for the installation environment, terrain, luminous radiation range, and brightness acceptance ability. In addition! To ensure the smooth installation of the outdoor advertising screen, it is required that the display must be tested before installation and lifting, to ensure that the outdoor screen equipment can be used normally and stably, and to avoid doing some useless work.
2, P8 outdoor LED display construction
Before building an outdoor LED billboard, we must first know whether it is an advertising screen, a hanging type, an advertising screen, or a roof-top advertising screen. When it comes to field installation, we should use cranes and hoists to hoist it in sections according to its distance and height, while ensuring that the personnel above the field cooperate, and there is an optimal installation and use process for the high-altitude LED advertising screen.
3, the radiation range of the LED screen
After installation, we need to check the radiation range of the display. Since the radiation range of each outdoor LED display is different, the viewing angle of the LED display will be different. Here, the outdoor LED display should be installed according to the field acceptance ability of the display screen and the normal viewing angle range to ensure that the display screen viewed from every angle can have normal brightness and balanced image and subtitle information.
4. Post-maintenance work
The post-maintenance work is also called after-sales service. It is mentioned that the important thing is post-test work. For example: LED display waterproof test, display heat dissipation layer function, LED display waterproof coating, rain cover on the display screen, heat dissipation function on both sides, whether the power supply to the screen is normal, etc. These basic operations can constitute the entire stable outdoor LED display. In the later stage, unified management and maintenance of the parts of the display will be carried out. In case the product is rusty, unstable, or damaged, the LED display manufacturers must replace it in time to ensure the safe use of the entire outdoor LED display.