After five years, under the organization of the LED Display Special Committee (now the China Optical Association LED Display Branch), the "LED Display Test Method" industry standard (hereinafter referred to as "Standard") will be released soon. Therefore, correctly guiding users to understand the performance indicators of LED display screens is of great significance to the specification of LED display market. In order to better implement the standard, the following recommendations are made.
1. the maximum brightness
In the industry "Standards" discussed at the end of last year, there is no clear characteristic requirement for the important performance of "maximum brightness", which is in line with GB/T1.2-2002. In the "Numerical Work Guide Part 2: Determination of the Content of Normative Technical Elements in the Standard", "5.4.3 Values Determined by the Supplier" refers to: "If the product is allowed to be diversified, then certain products The characteristic values do not have to be specified (although these characteristics have a significant impact on the performance of the product). Because the environment in which the LED display is used varies widely, the illumination (which is what the average person calls the ambient brightness) is different, so "for most complex products, a performance data is provided by the supplier as long as the corresponding test method is specified in the standard. The (product information) list is better than the specific performance requirements given in the standard." These are in line with international standards, but this also creates unrealistic comparisons in bidding, and users do not understand this, resulting in the âmaximum brightnessâ required in many bids is often much higher than the actual needs. Therefore, it is recommended that in order to guide users to correctly understand the "maximum brightness" of the LED display, it is necessary for the industry to give a guide: in some occasions, under the different illumination environment, what is the brightness of the LED display Can meet the requirements.
2. the primary color wavelength error
Changing the primary color wavelength error index from the "primary color wavelength error" to the "primary color primary wavelength error" is more indicative of what this LED reflects in the LED display. The dominant wavelength of color is equivalent to the hue of the color observed by the human eye. It is a psychological quantity and an attribute that distinguishes colors from each other. And the performance requirements stipulated by this industry standard, literally, users can not understand that it is an indicator reflecting the color uniformity of LED display. So, is it to guide the user to understand the term first, and then understand this indicator? Or do you first understand and understand the LED display from the customer's point of view, and then give you the easy-to-understand performance characteristics that users can understand? As mentioned in the above-mentioned GB/T1.2-2002 (Standardization of the content of normative technical elements in the standardization work guide Part 2 standard), one of the principles for the formulation of product standards is the âperformance principleâ: âwhen possible Requirements should be expressed by performance characteristics, without design and description of features, this method leaves the greatest room for technological development. "Primary color primary wavelength error" is such a design requirement, because of "color uniformity" Instead, there is no LED that defines the wavelength. For the user, as long as you ensure that the color of the LED display is uniform, regardless of the technical means you use, it is as large as possible for the development of technology. There is room for this, which is greatly beneficial to the development of the industry.
3. duty cycle
Just like the "performance principle" mentioned above, "if possible, the requirements should be expressed by performance characteristics, without design and description of the characteristics, this method leaves the greatest room for technological development." We believe that "duty cycle" is purely a design technology requirement and should not be used as a performance indicator for LED display product standards; everyone knows that there is a user who cares about the display duty cycle of the display, they care The effect of the display is not the realization of our technology; why should we create such technical barriers and limit the technological development of the industry?
4. refresh frequency
ããWe are a professional manufacturer of P2, p2.5, P3, P4, p4.81, P5, P6, P8, P10 indoor and outdoor LED displays, providing you with high-quality, high-definition, cost-effective LED display products.
ããAt present, the company's main LED full-color display engineering manufacturing, indoor series LED display, outdoor series LED display, stage rental series LED display, floor tile interactive LED display, transparent screen, etc. JYLED has the advantages of stable quality, clear picture, colorful color, energy saving, long service life, and affordable price.
ããIf you have led display products you want to know, you can provide your information below.